NETCO1-M2是MECHATROLINK-I通信和RS-485通信的通信转换器。
将上位通信的 MECHATROLINK-I通信协议转换成下位的RS-485通信协议后，能够利用MECHATROLINK-I通信对本公司的RS-485通信对应产品进行控制。下位的RS-485通信协议为本公司特有的通信规格。使用MEXEO2时，需使用连接计算机与NETCO1-M2的数据设定软件用通信电缆线CCO5IF-USB(另售)。请务必购买。
NETCO1-M2是为组装到机器上使用而设计、制造的。请将其设置在通风良好、检查方便的下述场所。
设置在室内的机框内（请开设通风口)
使用环境温度0~+40 ℃C(无结冰)使用环境湿度85%以下（无结露)
没有爆炸性气体环境、有害气体（硫化气体等）及液体无直射阳光照射
尘埃、铁粉等较少
不会沾染水(雨或水滴)、油（油滴）及其它液体盐份较少
没有连续性振动或过度冲击
电磁干扰少（如溶接机、动力机器等)·无放射性物质或磁场等，非真空环境
NETCO1-M2 is a communication converter for MECHATROLINK-I communication and RS-485 communication.
After converting the MECHATROLINK-I communication protocol from the upper level communication to the lower level RS-485 communication protocol, MECHATROLINK-I communication can be used to control our company’s RS-485 communication corresponding products. The lower RS-485 communication protocol is a unique communication specification of our company. When using MEXEO2, it is necessary to use the communication cable CCO5IF-USB (sold separately) that connects the computer to NETCO1-M2 data setting software. Please make sure to purchase.
NETCO1-M2 is designed and manufactured for assembly on machines. Please place it in a well ventilated and easily accessible place for inspection.
Set inside the indoor unit frame (please provide ventilation openings)
Operating environment temperature 0~+40 ℃ C (no icing) Operating environment humidity below 85% (no condensation)
No explosive gas environment, harmful gases (sulfide gases, etc.), and liquids without direct sunlight exposure
Less dust, iron powder, etc
Not contaminated with water (rain or droplets), oil (droplets), and other liquids with less salt content
No continuous vibration or excessive impact
Low electromagnetic interference (such as fusion machines, power machines, etc.) · No radioactive substances or magnetic fields, non vacuum environment
There are no reviews yet.