GE 369-HI-R-M-F-E-H-E微机保护与测控装置采用了国际先进的DSP和表面贴装技术及灵活的现场总线（CAN）技术，满足变电站不同电压等级的要求，实现了变电站的协调化、数字式及智能化。此系列产品可完成变电站的保护、测量、控制、调节、信号、故障录波、电度采集、小电流接地选线、低周减载等功能，使产品的技术要求、功能、内部接线更加规范化。产品采用分布式保护测控装置，可集中组屏或分散安装，也可根据用户需要任意改变配置，以满足不同方案要求。微机保护装置适用于110KV及以下电压等级的保护、监控及测量，可用于线路、变压器、电容器、电动机、母线PT检测、备用电源自投回路及主设备的保护、控制与监视。
369-HI-R-M-F-E-H-E
规范的现场总线接口支持多个节点协调工作，实现系统级管理和综合信息共适用范围随着科学技术手段的进步，和对适用环境更高要求，微机保护功能性也越趋完善。GE 369-HI-R-M-F-E-H-E通用型微机综合保护装置可作为35KV及以下电压等级的不接地系统、小电阻接地系统、消弧线圈接地系统、直 接接地系统的各类各类电器设备和线路的保护及测控，也可作为部分66KV、110KV电压等级中系统的电压电流 的保护及测控 。
369-HI-R-M-F-E-H-E
解决方案,使工程师能够在PXI平台上使用高速、仪器级、可重构和用户定义I/O的可操作性。所有的NIFREFRRIO解决方案都需要两个不同的硬件件–一个I/O特定的适配器模块和一个基于PXI的NIFREFRRRROGA模块,该模块的特点是具有一个XilinxVVO5虚拟可编程门阵列(FPGA)。有各种各样的镍弹性适配器模块,设计人员可以直接将FPGAS与新型的I/O连接起来,以便在需要实时测试的自动测试应用中进行测量。单元化的设计使其不但能方便地配备于一次设备，也可以集中组屏、集中控制。
369-HI-R-M-F-E-H-E
The GE 369-HI-R-M-F-E-H-E microcomputer protection and measurement and control device adopts internationally advanced DSP and surface mount technology, as well as flexible field bus (CAN) technology, to meet the requirements of different voltage levels in substations, achieving coordinated, digital, and intelligent substation. This series of products can complete functions such as substation protection, measurement, control, regulation, signal, fault recording, electrical degree acquisition, small current grounding line selection, low cycle load shedding, etc., making the technical requirements, functions, and internal wiring of the product more standardized. The product adopts a distributed protection and measurement device, which can be centrally grouped or installed dispersedly. The configuration can also be changed arbitrarily according to user needs to meet different scheme requirements. The microcomputer protection device is suitable for protection, monitoring, and measurement of voltage levels of 110KV and below. It can be used for line, transformer, capacitor, motor, busbar PT detection, backup power automatic switching circuit, and protection, control, and monitoring of main equipment.
369-HI-R-M-F-E-H-E
The standardized fieldbus interface supports the coordinated work of multiple nodes, achieving system level management and comprehensive information sharing. With the progress of scientific and technological means, and higher requirements for the applicable environment, the functionality of microcomputer protection is also becoming more and more perfect. The GE 369-HI-R-M-F-E-H-E universal microcomputer comprehensive protection device can be used for the protection and measurement of various types of electrical equipment and lines in ungrounded systems, small resistance grounding systems, arc suppression coil grounding systems, and direct grounding systems with voltage levels of 35KV and below. It can also be used for the protection and measurement of voltage and current in some systems with voltage levels of 66KV and 110KV.
369-HI-R-M-F-E-H-E
The solution enables engineers to use high-speed, instrument level, reconfigurable, and user defined I/O operability on the PXI platform. All NIFREFRRIO solutions require two different hardware components – an I/O specific adapter module and a PXI based NIFREFRRROGA module, which features a XilinxVVO5 virtual programmable gate array (FPGA). There are various nickel elastic adapter modules that designers can directly connect FPGAS with new I/O for measurement in automated testing applications that require real-time testing. The modular design not only makes it convenient to equip with primary equipment, but also enables centralized screen assembly and control.
There are no reviews yet.