IS210AEBIH3BED I/O总线控制模块

GE IS210AEBIH3BED 通讯输出接口组件是一种用于工业控制系统的组件,通常用于与其他设备或系统进行通信、数据传输和控制。

GEIS210AEBIH3BED的特点如下12:
数字输入:GE Fanuc制造的输入模块，是有源l/O模块，可提供2、4、8或16个通道。
电压范围:安装跳线时，输入电压范围是85伏到132伏交流电，标称电压为120伏;未安装跳线时，输入电压范围为176伏至264伏交流电，标称电压为240伏。
频率范围:47Hz至63Hz。
保护措施:支持短路和过载保护。GE IS210AEBIH3BED的规格如下1:输入模块类型:数字量输入模块。输入通道:2、4、8或16个。输入电压:12到24VDC。输入电流:0.1A。
输入模式:普通操作、脉宽调制(PWM) 、TPU操作。数字输入是GE Fanuc制造的输入模块，是有源V/O模块，可提供⒉、4、8或16个通道。数字输入旨在连接到可编程逻辑控制器系统中的现场总线网络适配器，因为它们和系统中的数字输出将通过网络适配器传送其所有数据。尽管网络适配器是为现场总线设计的，但数字输入并不是因为它们独立于现场总线并可与大多数GE Fanuc PLC现场总线设备一起使用。根据现场总线传输的数据量，多可将64个有源IⅣ/O模块(如数字输入)一次连接到GE Fanuc RSTi-IP站。

The characteristics of GEIS210AEBIH3BED are as follows:
Digital Input: The input module manufactured by GE Fanuc is an active l/O module that can provide 2, 4, 8, or 16 channels.
Voltage range: When installing the jumper, the input voltage range is 85 volts to 132 volts AC, with a nominal voltage of 120 volts; When the jumper is not installed, the input voltage range is 176 volts to 264 volts AC, with a nominal voltage of 240 volts.
Frequency range: 47Hz to 63Hz.
Protection measures: Support short circuit and overload protection. The specifications of GE IS210AEBIH3BED are as follows: 1. Input module type: Digital input module. Input channels: 2, 4, 8, or 16. Input voltage: 12 to 24VDC. Input current: 0.1A.
Input modes: normal operation, pulse width modulation (PWM), TPU operation. Digital input is an input module manufactured by GE Fanuc, which is an active V/O module that can provide 2, 4, 8, or 16 channels. The digital inputs are designed to connect to the fieldbus network adapters in the programmable logic controller system, as they and the digital outputs in the system will transmit all their data through the network adapters. Although network adapters are designed for fieldbus, digital inputs are not independent of fieldbus and can be used with most GE Fanuc PLC fieldbus devices. According to the amount of data transmitted on the fieldbus, up to 64 active I IV/O modules (such as digital inputs) can be connected to the GE Fanuc RSTi IP station at once.