GE IC698CRE030-DE 中央处理器模块 用于指示端口的活动状态

IC698RMX01 6-ED的特性和优点：IC698CRE030 CPU是一种额定频率为600兆赫的奔腾M几余CPU. 它由GE Fanuc在GE RX7i PACSystem系列可编程逻控制器元件中制造C698CRE030 CPU可以安装在RX7i PLC的VME64背板中。该设备有一个内置的以太网端口，额定通信速度为10或100 mb,由两个都是RJ-45端口的双端口组成，该以大网端C ]有一个自动感应开关， 可用于在线监控和上传下载数据。IC698CRE30 CPU上的以太网接口允许用户从网络浏览器监控PLC,它不需要集线器或机架交换机就能正常运行。IC698CRE030几余CPU具有 64 MB的用户内存。

IC698CRE030-DE

除了双RJ-45以大网端口之外，GE Fanuc 1C698CRE030 Pentium-M余CPU还具有另一个以大网端口，即用于站管理的RS-232行端口和用于RS-232通信和RS-485通信的另外两个串行端口。所有这3个串行端口都是隔离的，RS-232通信端口有一个LED指示灯，用于指示端口的活动状态，其连接器类型为9D-Sub母连接器。该端口也称为DCE或数据通信设备端口只需要一根直通电缆进行连接。IC698CREO30 CPU_上的RS-485通信端口也是一个DCE端口， 但它需要屏蔽电然进行连接。站管理器端口使用直通电缆进行RS-232连接,就像普通的RS-232电缆-样

IC698CRE030-DE

The characteristics and advantages of IC698RMX01 6-ED: The IC698CRE030 CPU is a Pentium M with a rated frequency of 600 MHz It is manufactured by GE Fanuc in the GE RX7i PACSystem series programmable logic controller components, and the C698CRE030 CPU can be installed on the VME64 backplane of the RX7i PLC. This device has a built-in Ethernet port with a rated communication speed of 10 or 100 mb, consisting of two dual ports that are both RJ-45 ports. The large network end C] has an automatic sensing switch, which can be used for online monitoring and uploading/downloading data. The Ethernet interface on the IC698CRE30 CPU allows users to monitor the PLC from a network browser, and it can operate normally without the need for a hub or rack switch. IC698CRE030 has over 64 MB of user memory on several CPUs.

IC698CRE030-DE

In addition to the dual RJ-45 Ethernet ports, the GE Fanuc 1C698CRE030 Pentium M CPU also has another Ethernet port, which is the RS-232 line port for station management and the other two serial ports for RS-232 communication and RS-485 communication. All three serial ports are isolated, and the RS-232 communication port has an LED indicator to indicate the active status of the port. Its connector type is a 9D Sub female connector. This port, also known as a DCE or data communication device port, only requires a through cable for connection. IC698CREO30 CPU_ The RS-485 communication port on the is also a DCE port, but it needs to be shielded for connection. The station manager port uses a through cable for RS-232 connection, just like a regular RS-232 cable

IC698CRE030-DE

IC698CRE030-DE