AAP3798102-00130 CAMERON 通用显示压缩机控制模块，AMERON AAP3798102-001 30通用显示压缩机控制模块便用通用接线板或接线板将接线板安装在控制外壳内，并将屏蔽电缆从接线板连接到模块接线板端子上的每个输入电路。Y将每根电缆的屏蔽连接到接线板旁边的金面板。不要在模块端连接屏蔽(在电缆模块端切断屏蔽，用屏蔽电缆将现场设备连接到端子板，仅在设备端接地屏蔽(在电缆的端子板端切断屏蔽并用热缩管绝缘)。此外,应尽可能缩短端子板和设备端的外露(屏蔽外部)引线的长度。直接方法Y将屏蔽电缆从现场设备(传感器、电位计等)直接连接到模块。Y将导体连接到模块端子板上的适用螺钉上。将现场设备端的屏蔽接地，使最小数量的导体暴露在噪声环境中。不要在模块端连接屏蔽(切断电氦模块端的屏蔽并用热缩管绝缘)。
AAP3798102-00130
CAMERON AAP3798102-001 30TBQC不推荐用于模拟模块由于电缆屏蔽要求，端子板快速连接(TBQC)AAP3798102-00130 CAMERON帮助创建定制配置或从头开始设计系统AAP3798102-00130具有I/O加载功能，旨在为用户和开发人员提供任何应用的灵活部署。BOXER-8253Al通过HDMI输入为平台带来了新的功能，允许开发人员和用户快速将人工智能支持的视觉分析添加到从NVR监控系统到安检X射线扫描仪和医疗设备的广泛应用中。此外，BOXER-8253Al具有两个PoE PSE端口(802.3af)，可提供高达60W的总功率，用于连接PoE摄像机甚至PoE PD设备等设备并为其供电。
AAP3798102-00130
AAP3798102-00130 CAMERON Universal Display Compressor Control Module, AMERON AAP3798102-001 30 Universal Display Compressor Control Module uses a universal terminal block or terminal block to install the terminal block inside the control enclosure, and connects shielded cables from the terminal block to each input circuit on the module terminal block. Connect the shielding of each cable to the gold panel next to the wiring board. Do not connect a shield at the module end (cut the shield at the cable module end, connect the field equipment to the terminal board with a shielded cable, and only ground the shield at the device end (cut the shield at the terminal board end of the cable and insulate with a heat shrink tube). In addition, the length of exposed (shielded external) leads on terminal boards and equipment ends should be minimized as much as possible. Direct method Y connects shielded cables directly from field devices (sensors, potentiometers, etc.) to the module. Y Connect the conductor to the applicable screw on the module terminal board. Ground the shielding of the on-site equipment end to expose the minimum number of conductors to a noisy environment. Do not connect shielding at the module end (cut off the shielding at the helium module end and insulate with a heat shrink tube).
AAP3798102-00130
CAMERON AAP3798102-001 30TBQC is not recommended for analog modules due to cable shielding requirements. Terminal Board Quick Connect (TBQC) AAP3798102-00130 CAMERON helps create custom configurations or design systems from scratch. AAP3798102-00130 has I/O loading capabilities and is designed to provide users and developers with flexible deployment of any application. BOXER-8253Al brings new features to the platform through HDMI input, allowing developers and users to quickly add artificial intelligence supported visual analysis to a wide range of applications, from NVR monitoring systems to security X-ray scanners and medical devices. In addition, BOXER-8253Al has two PoE PSE ports (802.3af) that can provide a total power of up to 60W, used to connect and power devices such as PoE cameras and even PoE PD devices.
AAP3798102-00130
There are no reviews yet.